

Turn your Hue lights into your home’s security system.
When it detects motion or shaking, evasis turns on your lights, sounds the siren and lets your phone know.
One evening at home
Scroll through one evening and watch what evasis does around your home, moment by moment.
EveningAll quiet
Evening settles in. The lights are on, the house is quiet, and evasis waits on the hallway console.
ArmedOne tap on your way out
On your way out, arm the alarm from the app or the remote by the door. The iron you left on switches itself off, and your home camera can switch on if you like.
- You arm the alarm
- The lights go out
- The iron's plug switches off
- The house is protected

evasisnow
Armed
The house is protected. Have a good evening.
What you need
evasisrequirediPhone appeither one
Hue Tap / Dimmereither oneTapo P100optional
WarningSomeone on the balcony
The moment someone steps onto the balcony, the nearest room lights up for 60 seconds and a short siren sounds. It's a warning, so the alarm stays armed.
- Someone appears on the balcony
- The sensor notices
- The living room lights up
- Your phone gets a warning

evasisnow
Outdoor alert
An outdoor sensor detected motion.
What you need
evasisrequiredHue Bridgerequired
Hue outdoor sensorrequiredHue lightsrequired
Optional feature: works with an outdoor sensor.
IntrusionNo one should be inside
If something moves inside while you're away, every light flashes a deep amber for 100 seconds and the siren sounds for 90. Two minutes later, protection re-arms itself.
- Movement in the hallway
- Every light starts flashing
- The siren sounds
- Your phone lights up

evasisnow
Intrusion detected
Motion was detected while the alarm was armed. Someone is in your home.
What you need
evasisrequiredHue Bridgerequired
Hue motion sensorrequired
Hue lightsrequired
ShakingA tremor in the night
The evasis box feels the shaking itself. Every light turns white and the burglar alarm goes quiet; if you're asleep, a short siren wakes you so you can see your way to safety.
- The box shakes
- Every light turns white
- The burglar alarm stops
- A short siren wakes you

evasisnow
Shaking detected
The appliance measured shaking above its threshold.
What you need
evasisrequiredHue lightsoptional
No extra devices needed.
In your pocketHome, wherever you are
Alerts reach you even when Focus is on. Arm or disarm from anywhere in the app, with no VPN to set up, and everyone at home can add their own phone.
- An alert hits your Lock Screen
- You open the app
- You disarm from afar
What you need
iPhone apprequired
iPhone only; there's no Android app.
Protection in one tap
Arm or disarm; it names any sensor that still sees motion.
With you when you’re away
Reach your home from anywhere over an encrypted link, no VPN.
Panic button
Hold for one second and the siren sounds right away.
Live seismograph
Watch shaking live; let the app set the threshold.
Family and several homes
Everyone on their own phone; new phones join with approval.
Lock Screen and Siri
Evening alarm controls on your Lock Screen, or ask Siri.
Lights, plugs, remote
Run lights, smart plugs and the remote from the app.
Try it without a device
Demo mode plays the scenarios in a virtual home.
Compatible devices
What does it work with?
evasis handles shake detection on its own. Light and motion scenarios need Philips Hue; everything else is optional.

evasis
The control unit. It senses shaking itself and runs the scenarios.
Philips Hue BridgeConnects Hue lights and sensors to evasis.
Hue motion sensorSenses movement inside while you're protected.
Philips Hue lightsLight up the home on warnings, intrusions and shaking.
Hue outdoor sensorTells you about movement on the balcony or in the garden.
TP-Link Tapo P100Switches the plugged-in device off when you arm.
Philips Hue TapArms or disarms the alarm with one press.
Hue Dimmer SwitchRuns the alarm from a remote on the wall.
iPhone + evasisAlerts and control from anywhere.
Lines show compatibility. Hue sensors, lights and remotes connect through the Bridge; your iPhone reaches home from anywhere.
The box itself
We started building it in 2015. 10 × 10 × 7 cm, white; its magnetic base senses shaking, and it has 4 USB ports.

- 10 × 10 × 7 cm
- Magnetic base senses shaking
- Wi-Fi and Ethernet
- 4 × USB
- No monthly fee
App and connectivity
No monthly fee. The app, remote access and notifications are all included.
- Mobile app
- evasis for iOS (App Store)
- Remote access
- Yes; no VPN needed, end-to-end encrypted
- Paired phones
- Several; a phone at home approves new ones
- On one phone
- Several homes
- Notifications
- Intrusion, shaking, outdoor warning, device unreachable
- Languages
- Turkish, English
Show technical specs
Technical specs
- Model no.
- R3BP
- Wireless
- 2.4 GHz + 5 GHz, 802.11 b/g/n/ac
- Ethernet
- Gigabit (up to 300 Mbps)
- USB ports
- 4 × USB 2.0
- Dimensions
- 10 × 10 × 7 cm
- Power adapter
- 5 V / 2.5 A DC
- Operating temperature
- 0–50 °C
- Power input
- USB Type-C
- Color
- White
Setup
Connect the device to your network and power, install the app and pair. The guide walks you through each step.
Videos
Introduction film
How to set it up
How to set the shake threshold in Settings
Testing shake detection on a balance game
Development process (prototype)








